We independently select these products—if you buy from one of our links, we may earn a commission.
Kristin Purcell spent this past year working from her Florida home and needed a designated space for an office. The creative lead — and chief candle pourer — behind the popular online decor shop, Henro Company, Purcell originally thought she’d use a spare bedroom but decided against that once she realized her formal dining room was actually the perfect spot for what she needed: an underused, quiet first floor room where she’d also be able to easily keep tabs on her young son. “The space is a great size — 13-feet by 13-feet, has a nice big window, a tray ceiling, and wood floors,” says Purcell. What it didn’t have though: statement-making storage, which Purcell felt like the room needed for practical and aesthetic reasons, particularly with its location right near her home’s entry. “I couldn’t just add a desk and some floating shelves,” she says. “I wanted it to wow people when they walked in.”
To set off the space, Purcell’s mind immediately went to a wall of library-like built-in shelves with closed base cabinetry, and she wanted to go the custom route — that is, until she priced the work out. Quoted anywhere from $8,000 to $12,000 (and six to 12 weeks before construction would even start!), Purcell decided to take matters into her own hands. “The design was pretty simple in my opinion, and don’t get me wrong, I know that custom woodworking is a skill, and carpenters deserve every penny,” she says. “It just wasn’t in the budget, and I’m not patient enough to wait several weeks when I wanted to start utilizing the space immediately.”
A big fan of IKEA hacks, Purcell decided to try one herself here with the HAVSTAseries, a lesser known IKEA product she’d never even seen in person. She ordered four units in total, honing in on a mix of shelf configurations for a more bespoke look. “Two of them had open upper shelves, and the other two had closed upper shelves,” says Purcell. “My thought was I’d simply line them up in a row, attach them to each other, and add some trim pieces around them to give them that built-in look.”
Pleasantly surprised by the fact that the shelves were solid wood (and unfazed by the particle board backs… since she’d be building the units into the wall anyway… and covering an existing door opening in the the process), Purcell got to work assembling all four units. “I’m not an expert carpenter by any means, but this wasn’t my first time using power tools, so I had enough experience to know how I wanted to execute this project,” says Purcell. “I lined up the cabinets across my wall and started playing with their spacing, figuring out how I wanted to make my connections and literally just started building.” The HAVSTA cabinets come with lower units and upper units, so Purcell focused on the lowers first and built a base for all of them to sit on. “That raised them up just a bit and allowed me to run one long piece of wood across the front, which really gives the illusion that this’s one custom built-in.” From there, she secured the cabinets to the base and connected the cabinets together using primed pine vertically aligned between each lower base unit, again to mimic the look of something more bespoke.
With the lower units in place, Purcell then added a ledge — two pieces of pine that ran the length of the entire wall. “The HAVSTA lower units are deeper than the top units, which creates a really nice look,” she says. After installing the ledge, she turned her attention to the uppers. For the uppers with open shelves, she wanted to create a little visual interest, so she attached a simple beadboard backing. “Swapping out [the particle board backing] for sometime with a pattern significantly upgraded the look,” Purcell says. “Once my upper units were prepped with their backings attached, I attached the upper units to the lower base and ledge.” She then used primed pine vertically again between the units to connect them.
With the cabinetry all in place, Purcell focused on finishing off the top of the piece. Since her ceilings are tall, she decided to build out another shelf to crown the unit. “I used pine and made some simple boxes using my Kreg jig,” she says. “Don’t let this step scare you. It’s easy, and there are a ton of videos that will show you how to use a Kreg jig and build beautiful boxes for the upper portion.” With the upper shelves in place, she started working on trimming out their outer sides and the top. “I used MDF boards cut to size, so they fit from my cabinet to the wall and secured them,” she says. To finish off the built-ins, Purcell sanded everything down, caulked it, primed it, and then used a paint sprayer to coat the whole thing in the perfect moody blue shade, Valspar’s Relaxed Navy. For a finishing touch, she swapped out the hardware that came with the units for antique brass knurled knobs.
The project took about 40 hours from start to finish, but the cost — only $2,000 total! — shaved so much off of the estimate from pro contractors. Purcell was surprised by the fact that she didn’t need to shim and level the units when connecting them, which she attributes to their solid wood construction. In hindsight, the only thing she really would have done differently is practiced a little more with the paint sprayer before going all in on the cabinets. Watch for drips, she says, and avoid applying too much paint in a single coat, which prevents the need to back-roll areas for evenness. Her second coat hid any problem areas though, and any time she needed a little bit of reassurance with any of her tools for as step along the way, she’d pull up a YouTube tutorial and work through it.
In the end, Purcell was in awe of what she created — again for both its form and function. “There’s so much concealed storage and just enough open shelving to display all my favorite decor pieces,” she says.” It is definitely a stunner. Everyone that walks through my front door looks into my office and says, ‘WOW!’ When I say, ‘I built that’, they are in disbelief.”